Skip to content

DaVinci Lab Glow in the Dark/Luminous PLA (1.75mm)

Original price R 319.00 - Original price R 449.00
Original price R 319.00
R 319.00
R 319.00 - R 449.00
Current price R 319.00
Colour: White

Only 1 in stock.

Add to Wishlist

DaVinci Lab PLA based Glow in the Dark filament Need we say more...charge with light and watch it glow.  (Hardend nozzles are recommended for printing luminous filaments) 

Davinci Lab Luminus or Glow in the Dark PLA

Print temp :- 190 - 220 degrees 

Heated Bed :- 50 - 60 degrees (optional) 

Speed range :- 50 - 80 mm/s optimal 

Fan :- Yes 

Printability :- Easy 

Requires Hardend Nozzle 

Weight :- 1kg

 

*OUR SPOOLS ARE NOT CHIPPED AND WILL NOT WORK WITH XYZ PRINTERS

Customer Reviews

Based on 6 reviews
67%
(4)
17%
(1)
17%
(1)
0%
(0)
0%
(0)
D
Dawie Venter
DaVinci Lab Glow in the Dark/Luminous PLA

I printed a phone stand at 203 with 0.5 nozzle and it came out pretty good , glowed for hours from normal bedroom lights.

D
Darryl Culverwell

Great service, well done guys

J
Joshua Ward
Prints well but spool is a bit of a problem

So far no problem with how this prints - glows nicely in the dark for a while. The spool which the filament is on has a inner hole with two ridges that keeps getting stuck and falling off my filament holder

A
Aidan Davies
Amendment

Due to its Brittle nature, This filament is easilly ground by the extruder. if this is an issue Turn of retraction completely. you can sand the strings and blobs off.

A
Aidan Davies
Struggled at first But it Prints beautifully

Initially, I had trouble with extruder grinding but it turned out I had temperature tower settings on and it failed when the temperature reached 185.
I had not noticed this as PLA+ is more forgiving.

It Is more Brittle than PLA but is almost as easy to print.
I use 200 degrees, but it prints fine at 220
This filament is great if you want to sand it. the sanded surface is Hard and smooth
Leave in the sun to charge. Indoor light is not nearly as effective.

Customer Reviews

Based on 6 reviews
67%
(4)
17%
(1)
17%
(1)
0%
(0)
0%
(0)
D
Dawie Venter
DaVinci Lab Glow in the Dark/Luminous PLA

I printed a phone stand at 203 with 0.5 nozzle and it came out pretty good , glowed for hours from normal bedroom lights.

D
Darryl Culverwell

Great service, well done guys

J
Joshua Ward
Prints well but spool is a bit of a problem

So far no problem with how this prints - glows nicely in the dark for a while. The spool which the filament is on has a inner hole with two ridges that keeps getting stuck and falling off my filament holder

A
Aidan Davies
Amendment

Due to its Brittle nature, This filament is easilly ground by the extruder. if this is an issue Turn of retraction completely. you can sand the strings and blobs off.

A
Aidan Davies
Struggled at first But it Prints beautifully

Initially, I had trouble with extruder grinding but it turned out I had temperature tower settings on and it failed when the temperature reached 185.
I had not noticed this as PLA+ is more forgiving.

It Is more Brittle than PLA but is almost as easy to print.
I use 200 degrees, but it prints fine at 220
This filament is great if you want to sand it. the sanded surface is Hard and smooth
Leave in the sun to charge. Indoor light is not nearly as effective.